Company News

Advantage of B imetal H ammerhead Hammerhead is a key component on the hammer crusher used in building materials, mining, chemical industry, etc. It is also a wearing part. The traditional hammerhead is mostly cast with high-manganese steel , and the high-manganese steel is used to improve the wear resistance under the impact load, but its wear resistance is far from being suitable for the modern production demand of high efficiency and low consumption. Due to the short life of the hammer and frequent replacement, the equipment operation rate is reduced. Therefore, it is necessary to seek a new material and new technology to improve the function and service life of the hammer. When the hammer head does not change its surface shape at the beginning of the work, the hammer head is mainly subjected to impact wear, and the material impacts the metal surface with a positive force to cause plastic deformation and impact craters. When the working surface of the hammer head is ground...

Introduction and Application of Rubber Beams 1.       Introduction The rubber beam is vulcanized and bonded by a multi-layer rubber sheet and a thin steel plate. It has sufficient vertical steel to reliably transmit the reaction force of the upper structure to the abutment; it has good elasticity to adapt to the beam end. Rotation, and greater shear deformation ability to meet the horizontal displacement of the upper structure. In addition to the PTFE plate on the surface of the above-mentioned plate rubber bearing, it can be made into a PTFE sliding plate rubber bearing. In addition to vertical steel and elastic deformation, it can withstand vertical loads and adapt to beam end rotation. In addition, due to the low friction coefficient of the PTFE plate, the beam end can slide freely on the surface of the PTFE plate, and the horizontal displacement is not limited. It is especially suitable for bridges with medium and small loads and large displacem...

Introduction and Application of HARDOX Wear Plate 1 .  Introduction HARDOX wear-resistant steel plates stand the test of the worst industrial and mining environments day after day, year after year, and can be used to manufacture the highest quality equipment and spare parts and maximize their service life, minimizing the risk of failure. Maximize production capacity. HARDOX wear-resistant steel plates can be used in the manufacture of buckets, loaders, dump trucks, crushers, classifiers, chutes and various wear-resistant liners . It can withstand any form of wear from a variety of rocks, sand and gravel. At the same time, it has good processability, allowing you to easily produce or customize your spare parts; steel warehouses around the world ensure fast delivery and reduce your inventory; technical and business support will be available All the tricks you need. HARDOX wear-resistant steel plates are classified according to hardness grade: HARDOX 400, HARDOX 450, HARDOX...